Melamine Matt Clear - Melamine Matt Clear Manufacturer & Supplier, Alwar, India

Product Code : Melamine Brand Name :Tansy Treat

Product Specification

Tansy Treat Melamine Clear Matt

Product Code: (CA08C.9000.13)
High performance two pack solvent based acid cured Matt Clear, intended for use as top coat transparent coating with excellent durability and stain resistance.

Recommended use
This product is intended for use as a top coat for base coat and direct on wood to provide excellent hardness&stain resistant coating. It is recommended as Topcoat for providing better durability, excellent gloss and colour retention , good stain resistance from oil , beverages and food .

Advantages

Acceptable for use in OEM and General Industry.
Excellent stain resistance .
Temperature resistance up to 80 ^oC.
Drying: Air dry
Re-coating within 8 hrs.

Typical Properties

Property	Value
Colour	Translucent white clear
Supply viscosity with B-4 Cup @ ^oC	115 + 5 sec
% Solids	55 + 2
Specific Gravity	1.02 + 0.03
Mix Ratio by Volume	9 : 1
Pot Life	>3 hrs @30 ^oC
%Thinner intake	35 - 40 %
Coverage (Theoretical)	8-10 sq.m / litre @ 30-35 microns
Cure Time	Surface Dry 20min. / Hard Dry 8 hours
Shelf Life @ 30^oC	1 year.
Recoat Time	8 hrs or after forced drying.
Temperature Resistance	8 ^oC
Gloss	>10 - 15 units at 60^o
Flexibility	Good
Chemical resistance	Good
Cured Hardness (Pencil)	2H

Surface Preparation
The surface should be clean, dry and free from oil, grease, dirt,& other foreign contamination. The surface should be assessed and treated in accordance with ISO 8504.

Application Instructions
Mix Part - A & Part - B in recommended ratio in clean container and mix for 2-3 min.
Dilute above solution with Compatible Thinner. Set application viscosity 18-22sec.
Filter with fine filter cloth (80 mesh size)
Ensure the surface is free from foreign contaminations.
Set air pressure at 40-50 psi
Spray to obtain a DFT of 30 - 35 microns
Air dry / force dry in dust free zone. Storage : Store containers in a dry, cool, well ventilated space and away from source of heat and fire.Loose containers must be kept tightly closed.

Packing: 1.0 ltr, 4.0 ltr and 20 ltr.

Disclaimer
Information mentioned herewith is obtained in the process of test carried out in controlled conditions in our laboratory and are true and accurate to the best of our knowledge. Tansy Paints India Pvt. Ltd. shall not be liable to any loss or claims whatsoever arising out of use of this product resulted due to variations in contents, condition of substrate and application parameters and factors not in control of the company. The company reserves the right to modify the contents, parameters, data contained herein, e.t.c. without any prior intimation and issue new product data sheet.

Other Products in 'Woodcoatings ' category

Woodstains	Exterior Clear PU	Melamine Sealer	PU White Sealer

<< Back